Altivar Soft Starter ATS130
Schneider ATS130N2D65LT | Altivar Soft Starter ATS130, 65A, 200 to 480V AC, control supply 24V DC
Availability:
Out of stock
Schneider ATS130N2D65LT | Altivar Soft Starter ATS130, 65A, 200 to 480V AC, control supply 24V DC
Compare
Schneider ATS130N2D65LT | Altivar Soft Starter ATS130, 65A, 200 to 480V AC, control supply 24V DC
| Range of product | Altivar Soft Starter ATS130 |
|---|---|
| Product or component type | Soft starter |
| product destination | Asynchronous motors |
| Product specific application | Simple machine |
| Device short name | ATS130 |
| Network number of phases | 3 phases |
| Utilisation category | AC-53A |
| Ue power supply voltage | 200…480 V – 15…10 % |
| power supply frequency | 50…60 Hz +/- 5 Hz |
| [Ie] rated operational current | 65 A in line (at <40 °C) |
| Service factor at Ie | 100 |
| Torque control | False |
| IP degree of protection | IP20 |
| Motor power kW | 18.5 kW at 230 V normal duty 30 kW at 400 V normal duty 37 kW at 440 V normal duty |
| Motor power hp | 20 hp at 200 V normal duty 20 hp at 208 V normal duty 20 hp at 230 V normal duty 40 hp at 460 V normal duty 50 hp at 480 V normal duty |
| Overload current profile | 300 % Ie for 5 s |
|---|---|
| On-load factor | 70 % |
| Operating cycles/hour | 13 cyc/h |
| Minimum motor current | 20 % Ie |
| Device connection | In line |
| [Us] control circuit voltage | 24 V DC +/- 10 % |
| Control power | 21.6 W starting and stopping 3 W steady state |
| Integrated motor overload protection | False |
| Protection type | Phase failure: mains Thermal protection: starter Bypass error: starter Control voltage Us: starter |
| Rated current pwr loss specification | 65 A |
| Power loss static current independent | 3 W |
| Power loss per device current dependent | 16 W |
| Power loss during starting | 397 W 300 % Ie |
| Standards | EN/IEC 60947-4-2 UL 60947-4-2 IEC 60664-1 |
| Product certifications | CE UKCA CCC RCM EAC |
| Marking | CE CCC UKCA RCM EAC |
| [Uc] control circuit voltage | 24 V DC |
| Discrete input number | 3 |
| Discrete input type | (DI) digital input, 10 kOhm (DI2) digital input, 10 kOhm (BOOST) digital input, 10 kOhm |
| Input compatibility | Discrete input level 1 PLC conforming to EN/IEC 61131-2 |
| Discrete input logic | Digital input at State 0: 0…< 5 V and <= 0.2 mA at State 1: > 13 V, >= 0.5 mA |
| Relay output number | 1 |
| Relay output type | Relay outputs R1A, R1C NO |
| Minimum switching current | 2.5 mA at 24 V DC for relay outputs |
| Maximum switching current | On resistive load for relay outputs : 1 A 250 V AC 400000 cycles On resistive load for relay outputs : 1 A 30 V DC 400000 cycles On inductive load for relay outputs : 1 A 250 V AC cos phi = 0.4 100000 cycles On inductive load for relay outputs : 1 A 30 V DC cos phi = 0.4 100000 cycles |
| Discrete output number | 1 |
| Discrete output type | Non programmable digital output DQ1 <= 30 V 200 mA |
| Display type | 1 LED (green) for control power energized 1 LED (yellow and red) for motor operation phases, errors |
| Display screen available | False |
| Operating position | Vertical +/- 30 degree |
| Height | 166 mm |
| Width | 55 mm |
| Depth | 165 mm |
| Net weight | 1.3 kg |
| Suitable for mounting onto standard rails | True |
| Function available | Deceleration voltage ramp Boost |
| internal bypass | True |
| material declaration | True |
| Pollution degree | Level 2 |
|---|---|
| environmental class (during operation) | Without salt mist: 3C3 conforming to IEC 60721-3-3 3S3 conforming to IEC 60721-3-3 |
| [Uimp] rated impulse withstand voltage | 4 kV |
| [Ui] rated insulation voltage | 480 V |
| Electromagnetic compatibility | Conducted and radiated emissions level B conforming to IEC 60947-4-2 Short voltage interruptions level 3 conforming to IEC 61000-4-11 Electrostatic discharge level 2 conforming to IEC 61000-4-2 Radiated radio-frequency electromagnetic field immunity test level 1 conforming to IEC 61000-4-3 Electrical fast transient/burst immunity test level 2 conforming to IEC 61000-4-4 Oscillatory waves immunity level 3 conforming to IEC 61000-4-12 Voltage/current impulse level 2 conforming to IEC 61000-4-5 Conducted disturbances, induced by radiofrequency fields level 1 conforming to IEC 61000-4-6 |
| Ambient air temperature for operation | -10…40 °C (without derating) 40…60 °C (with current derating 1.5 % per °C) |
| Ambient air temperature for storage | -25…70 °C |
| Ambient air transport temperature | -40…70 °C |
| Operating altitude | 0…1000 m without derating 1000…4000 m 1 % per 100 m |
| Relative humidity | 5…95 % non condensing without dripping water conforming to IEC 60068-2-3 |
| Maximum acceleration under vibrational stress (during operation) | 10 m/s² at 9…200 Hz |
| Maximum acceleration under vibratory load (during storage) | 10 m/s² at 9…200 Hz |
| Maximum acceleration under vibratory load (during transport) | 10 m/s² at 9…200 Hz |
| Maximum deflection under vibratory load (during operation) | 3 mm at 2-9 Hz |
| Maximum deflection under vibratory load (during storage) | 3 mm at 2-9 Hz |
| Maximum deflection under vibratory load (during transport) | 3 mm at 2-9 Hz |
| Maximum acceleration under shock impact (during operation) | 100 m/s² at 11 ms |
| Maximum acceleration under shock load (during storage) | 100 m/s² at 11 ms |
| Maximum acceleration under shock load (during transport) | 100 m/s² at 11 ms |
| Unit Type of Package 1 | PCE |
|---|---|
| Number of Units in Package 1 | 1 |
| Package 1 Height | 6.300 cm |
| Package 1 Width | 27.000 cm |
| Package 1 Length | 28.000 cm |
| Package 1 Weight | 1.512 kg |
| Unit Type of Package 2 | S06 |
| Number of Units in Package 2 | 40 |
| Package 2 Height | 75.000 cm |
| Package 2 Width | 60.000 cm |
| Package 2 Length | 80.000 cm |
| Package 2 Weight | 69.500 kg |
| Warranty | 18 months |
|---|
There are no reviews yet.