No products in the cart.
-48%
Uncategorized 
Schneider LC1D258Q7 | Contactor, TeSys Deca, 4P(2NO+2NC), AC-1, <=440V, 40A, 380V AC 50/60Hz coil, screw clamp terminal
Availability:
In stock
Schneider LC1D258Q7 | Contactor, TeSys Deca, 4P(2NO+2NC), AC-1, <=440V, 40A, 380V AC 50/60Hz coil, screw clamp terminal
2,805 EGP 5,395 EGP
In stock
CompareSchneider LC1D258Q7 | Contactor, TeSys Deca, 4P(2NO+2NC), AC-1, <=440V, 40A, 380V AC 50/60Hz coil, screw clamp terminal
Schneider LC1D258Q7: The Ultimate Guide
Introduction
In the realm of industrial automation, reliable components are the backbone of efficient operations. One such crucial component is it contactor. This device plays a pivotal role in controlling electrical circuits, making it indispensable in various industrial applications.
What is the Schneider LC1D258Q7?
it is an advanced contactor designed to control electric motors and other high-power loads. Known for its durability and efficiency, this contactor is a part of Schneider Electric’s renowned product lineup. Key specifications include:
- Rated Operational Voltage: Up to 690V
- Conventional Free Air Thermal Current: 80A
- Utilization Category: AC-3
Applications of Schneider LC1D258Q7
it is versatile and finds applications in several areas:
- Industrial Automation: Ensures seamless operation of machinery and equipment.
- Motor Control: Facilitates efficient control of electric motors.
- HVAC Systems: Integral in heating, ventilation, and air conditioning systems for precise control.
Key Features of Schneider LC1D258Q7
it stands out due to its impressive features:
- High Reliability: Designed to withstand rigorous industrial environments.
- Compact Design: Saves space in electrical panels.
- Energy Efficiency: Helps in reducing energy consumption, contributing to cost savings.
Technical Specifications
Understanding the technical aspects of it is crucial for optimal use:
- Electrical Specifications:
- Rated insulation voltage: 690V
- Control circuit voltage: 24V to 415V
- Mechanical Specifications:
- Contact composition: 3NO + 2NC
- Mechanical durability: 10 million operations
- Environmental Specifications:
- Operating temperature range: -25°C to 60°C
- Degree of protection: IP20
Installation and Setup
Proper installation ensures the longevity and performance of the Schneider LC1D258Q7:
- Pre-installation Considerations: Verify voltage requirements and ensure proper grounding.
- Step-by-Step Installation Guide:
- Turn off the main power supply.
- Mount the contactor on a DIN rail.
- Connect the control circuit wires.
- Secure the power wires to the contactor terminals.
- Check all connections and restore power.
Advantages of Using Schneider LC1D258Q7
Choosing it brings several benefits:
- Efficiency in Operations: Reduces downtime and enhances productivity.
- Durability and Longevity: Built to last, ensuring a long service life.
- Cost-Effectiveness: Low maintenance and high efficiency lead to cost savings.
| Range of product | TeSys Deca |
|---|---|
| Product or component type | Contactor |
| Device short name | LC1D |
| contactor application | Resistive load |
| Utilisation category | AC-1 AC-3 AC-3e AC-4 |
| poles description | 4P |
| [Ue] rated operational voltage | Power circuit <= 690 V AC 25…400 Hz Power circuit <= 300 V DC |
| [Ie] rated operational current | 40 A (at <140 °F (60 °C)) at <= 440 V AC AC-1 for power circuit |
| [Uc] control circuit voltage | 380 V AC 50/60 Hz |
| Compatibility code | LC1D |
|---|---|
| Pole contact composition | 2 NO + 2 NC |
| Protective cover | With |
| [Ith] conventional free air thermal current | 10 A (at 140 °F (60 °C)) for signalling circuit 40 A (at 140 °F (60 °C)) for power circuit |
| Irms rated making capacity | 140 A AC for signalling circuit conforming to IEC 60947-5-1 250 A DC for signalling circuit conforming to IEC 60947-5-1 450 A at 440 V for power circuit conforming to IEC 60947 |
| Rated breaking capacity | 450 A at 440 V for power circuit conforming to IEC 60947 |
| [Icw] rated short-time withstand current | 240 A 104 °F (40 °C) – 10 s for power circuit 380 A 104 °F (40 °C) – 1 s for power circuit 50 A 104 °F (40 °C) – 10 min for power circuit 120 A 104 °F (40 °C) – 1 min for power circuit 100 A – 1 s for signalling circuit 120 A – 500 ms for signalling circuit 140 A – 100 ms for signalling circuit |
| Associated fuse rating | 10 A gG for signalling circuit conforming to IEC 60947-5-1 63 A gG at <= 690 V coordination type 1 for power circuit 40 A gG at <= 690 V coordination type 2 for power circuit |
| Average impedance | 2 mOhm – Ith 40 A 50 Hz for power circuit |
| Power dissipation per pole | 3.2 W AC-1 |
| [Ui] rated insulation voltage | Power circuit 690 V IEC 60947-4-1 Power circuit 600 V CSA Power circuit 600 V UL Signalling circuit 690 V IEC 60947-1 Signalling circuit 600 V CSA Signalling circuit 600 V UL |
| Overvoltage category | III |
| Pollution degree | 3 |
| [Uimp] rated impulse withstand voltage | 6 kV IEC 60947 |
| Safety reliability level | B10d = 1369863 cycles contactor with nominal load EN/ISO 13849-1 B10d = 20000000 cycles contactor with mechanical load EN/ISO 13849-1 |
| Mechanical durability | 15 Mcycles |
| Electrical durability | 1.4 Mcycles 40 A AC-1 <= 440 V |
| Control circuit type | AC 50/60 Hz |
| Coil technology | Without built-in suppressor module |
| Control circuit voltage limits | 0.3…0.6 Uc -40…158 °F (-40…70 °C) drop-out AC 50/60 Hz 0.8…1.1 Uc -40…140 °F (-40…60 °C) operational AC 50 Hz 0.85…1.1 Uc -40…140 °F (-40…60 °C) operational AC 60 Hz 1…1.1 Uc 140…158 °F (60…70 °C) operational AC 50/60 Hz |
| Inrush power in VA | 70 VA 60 Hz cos phi 0.75 (at 68 °F (20 °C)) 70 VA 50 Hz cos phi 0.75 (at 68 °F (20 °C)) |
| Hold-in power consumption in VA | 7.5 VA 60 Hz cos phi 0.3 (at 68 °F (20 °C)) 7 VA 50 Hz cos phi 0.3 (at 68 °F (20 °C)) |
| Heat dissipation | 2…3 W at 50/60 Hz |
| Operating time | 12…22 ms closing 4…19 ms opening |
| Maximum operating rate | 3600 cyc/h 140 °F (60 °C) |
| Connections – terminals | Control circuit: screw clamp terminals 1 0.002…0.006 in² (1…4 mm²) – cable stiffness: flexible without cable end Control circuit: screw clamp terminals 2 0.002…0.006 in² (1…4 mm²) – cable stiffness: flexible without cable end Control circuit: screw clamp terminals 1 0.002…0.006 in² (1…4 mm²) – cable stiffness: flexible with cable end Control circuit: screw clamp terminals 2 0.002…0.004 in² (1…2.5 mm²) – cable stiffness: flexible with cable end Control circuit: screw clamp terminals 1 0.002…0.006 in² (1…4 mm²) – cable stiffness: solid without cable end Control circuit: screw clamp terminals 2 0.002…0.006 in² (1…4 mm²) – cable stiffness: solid without cable end Power circuit: screw clamp terminals 1 0.004…0.02 in² (2.5…10 mm²) – cable stiffness: flexible without cable end Power circuit: screw clamp terminals 2 0.004…0.02 in² (2.5…10 mm²) – cable stiffness: flexible without cable end Power circuit: screw clamp terminals 1 0.004…0.02 in² (2.5…10 mm²) – cable stiffness: flexible with cable end Power circuit: screw clamp terminals 2 0.004…0.02 in² (2.5…10 mm²) – cable stiffness: flexible with cable end Power circuit: screw clamp terminals 1 0.004…0.02 in² (2.5…16 mm²) – cable stiffness: solid without cable end Power circuit: screw clamp terminals 2 0.004…0.02 in² (2.5…16 mm²) – cable stiffness: solid without cable end |
| Tightening torque | Control circuit 15.05 lbf.in (1.7 N.m) screw clamp terminals flat Ø 6 mm Control circuit 15.05 lbf.in (1.7 N.m) screw clamp terminals Philips No 2 Control circuit 15.05 lbf.in (1.7 N.m) screw clamp terminals pozidriv No 2 Power circuit 15.9 lbf.in (1.8 N.m) screw clamps terminals flat Ø 6 mm Power circuit 15.9 lbf.in (1.8 N.m) screw clamps terminals Philips No 2 Power circuit 15.9 lbf.in (1.8 N.m) screw clamp terminals pozidriv No 2 |
| Auxiliary contact composition | 1 NO + 1 NC |
| Auxiliary contacts type | Mechanically linked 1 NO + 1 NC IEC 60947-5-1 Mirror contact 1 NC IEC 60947-4-1 |
| Signalling circuit frequency | 25…400 Hz |
| Minimum switching voltage | 17 V for signalling circuit |
| Minimum switching current | 5 mA for signalling circuit |
| Insulation resistance | > 10 MOhm for signalling circuit |
| Non-overlap time | 1.5 ms on de-energisation between NC and NO contact 1.5 ms on energisation between NC and NO contact |
| Mounting support | Plate Rail |
| Standards | CSA C22.2 No 14 EN 60947-4-1 EN 60947-5-1 IEC 60947-4-1 IEC 60947-5-1 UL 508 |
|---|---|
| Product certifications | GL BV DNV LROS (Lloyds register of shipping) RINA UL CCC CSA GOST UKCA CB |
| IP degree of protection | IP20 front face IEC 60529 |
| Protective treatment | THIEC 60068-2-30 |
| Climatic withstand | IACS E10 exposure to damp heat IEC 60947-1 Annex Q category D exposure to damp heat |
| Permissible ambient air temperature around the device | -40…140 °F (-40…60 °C) 140…158 °F (60…70 °C) with derating |
| Operating altitude | 0…3000 m |
| Fire resistance | 1562 °F (850 °C) IEC 60695-2-1 |
| Flame retardance | V1 UL 94 |
| Mechanical robustness | Vibrations contactor open 2 Gn, 5…300 Hz) Vibrations contactor closed 4 Gn, 5…300 Hz) Shocks contactor closed 15 Gn for 11 ms) Shocks contactor open 8 Gn for 11 ms) |
| Height | 3.6 in (91 mm) |
| Width | 1.8 in (45 mm) |
| Depth | 3.9 in (99 mm) |
| Net weight | 0.937 lb(US) (0.425 kg) |
| Unit Type of Package 1 | PCE |
|---|---|
| Number of Units in Package 1 | 1 |
| Package 1 Height | 3.57 in (9.08 cm) |
| Package 1 Width | 1.8 in (4.5 cm) |
| Package 1 Length | 3.92 in (9.95 cm) |
| Package 1 Weight | 15.3 oz (435.0 g) |
| Warranty | 18 months |
|---|
There are no reviews yet.